T arm type galvanized steel traffic sign poles

Arm type traffic sign pole

Cantilever traffic sign pole -- F traffic sign pole, T traffic sign pole. The cantilever traffic sign pole is the sign plate mounted on the cantilever, and the height of the lower edge of the sign from the ground should be higher than the clearance height specified by the road.


Detail

Traffic sign pole is also known as road sign pole, highway sign pole, both sides of the highway used to indicate the traffic line of the column, traffic sign pole is processed by steel pipe, the surface after hot dip galvanized treatment.


Classification of sign posts

Traffic signs generally have single - column traffic signs, multi - column traffic signs.

The inside edge of the column sign shall not invade the building limit of the road, generally not less than 25cm from the outside edge of the roadway or sidewalk or the shoulder of the dirt road

The height of the lower edge of the traffic sign board from the road surface is divided into: the expressway shall be no less than 5500mm, and the national highway and provincial highway shall be no less than 5000mm.In urban roads with a large proportion of small cars, the height from the lower edge to the ground can be effective according to the actual situation, but should not be less than 120cm.

If the setting is on the side of the road with pedestrians and non-motor vehicles, the setting height shall be greater than 180cm.


Single column traffic sign pole

Single-column traffic sign pole is a sign board mounted on a column, suitable for medium and small size alarm,notices, injunctions, signs of direction and small signs of direction.


Multi-column traffic sign pole

Multi-column traffic sign pole is a sign board mounted on two or more columns and is suitable for rectangular indication or direction sign.


Arm type traffic sign pole

Cantilever traffic sign pole -- F traffic sign pole, T traffic sign pole. The cantilever traffic sign pole is the sign plate mounted on the cantilever, and the height of the lower edge of the sign from the ground should be higher than the clearance height specified by the road.


Portal frame traffic sign traffic gantry

The gantry traffic sign is installed on the gantry, and the lower edge of the sign should be higher than the clearance height stipulated by the road.

Door-type traffic sign posts are applicable to the following situations:

1. Multi-lane roads (leading to more than three lanes) shall indicate the direction of each lane;

2. Large traffic volume, large vehicles in the outer lane block the sight of small vehicles in the inner lane;

3. The traffic should stay in the interleaving, diverging and river sections at a high speed, such as: interconnecting three-dimensional crossing to build a closer place with dense signs, interconnecting three-dimensional crossing main line area where the highway intersects with the highway;


The main purpose

Widely used in highways, urban highways and various roads.


The main materials

S235, S355, etc. The length is between 1.5m -- 12M.


Sign poles main sizes


PartsVertical postTransverse rodBase flange
1219x7500x8.0mm89x4500x6.0mm500x500x16mm
2273x7500x8.0mm133x4500x6.0mm600x600x20mm
3325x7500x8.0mm159x4500x6.0mm700x700x24mm




Tag

t arm type traffic polesf arm type traffic polesgantry frame traffic polesgate type traffic polesdoor type traffic polesgalvanized traffic polesgalvanized steel posttraffic signstraffic sign boardsteel post

Huaan Traffic has performed crash testings according to MASH and EN1317-2, and passed the levels: TL1, TL2, TL3, TL4 and N1, N2, H1, H2, H3.

Contact Us

Phone: +86 137 7497 6669

E-mail: info@haguardrail.com

Add: Guanxian, Shandong Province, China.

Copyright © Shandong Huaan Traffic Facilities Co., Ltd. All Rights Reserved. | Sitemap | Technical Support: